FOXBORO FCM100Et

FOXBORO  FCM100Et   DCS system module

FCM100ET： How many objects, how much memory, and communication connections must be available for other sites are defined in the boot parameters. For the DCP gateway, no boot parameters have been configured as it runs on the CPU module. Therefore, a module with DCP 02GWY or DCP 10GWY type has been installed at the corresponding location.
The FCM100Et module is commonly used for the use or maintenance of DC speed control devices and motors. When the operating status of the device is 07.0, optimization operation is required, and the specific steps include:
P051=25： Pre control of armature and excitation and optimization of current regulator (performed under no-load or mechanically locked)
P051=26： Optimization of speed regulator (connected to payload)
P051=27： Optimization of excitation weakening (executed under no load)
P051=28： Optimization of Friction and Inertia Compensation (as needed)
P051=29： Optimization of speed regulator for transmission system with swing mechanism (lasting approximately 10 minutes)

Other models： FBM230 , FBM231 , FBM232 ,  FBM233  ，FBM237 ，FBM240 ，FBM241 ，FBM241C ，FBM242 ，FBMSSW ，FBMSVH ，FBMSVL ，FCM2F2 ，FCM10E ，FEM100 ，FCP270 ，FCP280 ，FPS400-24